213
Pad Group
The Pad Group feature extends the concept of Pad
Mutes: you can mute or unmute multiple pads (on a
single Track) by pressing one pad that you have
assigned to a Mute Group. This is useful if you want
to hear a Track without a particular group of sounds
or if you want to isolate specific sounds in various
combinations. You can create up to 16 different
Pad Groups.
In the software, do the following to use Pad
Groups:
1. Click the Pad Group button in the Mute
Section to activate it.
2. Click the desired bank (A–H) in the Bank
section or Pad Bank section.
3. Click a pad in the Pad Bank section that you
want to assign to a Mute Group.
Alternatively, you can click the the miniature
pads in Bank section. This section gives you
an overview of all 128 pads at the same time.
Unused pads are greyed out.
4. Click and drag the Pad field in the Mute
Section up or down to select the desired Mute
Group number.
When a pad in a Mute Group is selected, the
other pads in that same Mute Group will blink
yellow.
Time Correct lets you quantize Pad Mutes. This is useful when you want your mutes to line up with a
specific time division. Click the Time Correct drop-down menu and select a value from 1/16th (sixteenth
notes) to 2 bar (2 bars). For example, with Time Correct set to 1 bar, your mutes will always align with
the beginning of the measure immediately after you press the pad.
To Next Page
Loading...
Need help?
General
