Akai MPC User Manual

368
Preferences
Project Tab
The Preferences window now has a Project tab
where you can set default settings for each
project:
• Default Tempo: Click and drag this field
up or down to set the default tempo.
• Default Master Tempo: Click this button
to select whether or not the default tempo
applies to Sequences (Off) or to a Master
Tempo (On).
• Default Sequence Bars: Click and drag
this field up or down to set the default
number of bars for new Sequences.
• Default Time Signature: Click and drag
each of these field up or down to set the
default time signature for new Sequences.
• Default Pad Slice: Click this drop-down
menu to select how new samples will play
when you load them or record them into
the Project. When set to Pad, the Slice
menu in Program Edit Mode will be set to
Pad, which lets you set the start point, end
point, etc. for the layer. When set to All,
the Slice menu in Program Edit Mode will
be set to All, in which the entire sample
plays (the default behavior in MPC 1.8.2
and earlier versions).

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired