Akai MPC

236
Master Effects
You can load, edit, or remove up to four Master effects.
To load a Master effect:
1. In the software, click the Track Mixer tab in the Mode Tab Section.
2. In one of the four slots of the Master FX column, click the downward arrow ().
3. Select an effect from the menu that appears.
Hardware: To load and edit a Master effect:
1. Press Shift + Seq Edit / Effects.
2. Press F2 (Insert).
3. Use the Cursor Buttons to select the desired Insert effect slot.
4. Use the Data Dial or the -/+ buttons to open another page to select an effect.
Click F4 (Select) to load it, or click F3 (Back) to close the page.