338
Program Mode
You can now edit a sample in the context of the Program in which you'll use it. In this mode, you can
adjust the pad parameters as though you were in Program Edit Mode, auditioning and hearing how it will
sound in the Program's audio path.
To do this:
1. In Sample Edit Mode, click the Program Mode button above the Q-Link Knobs. The pads will show
their assigned samples in the current Program.
2. Click a pad to hear its sample(s). The sample on its first layer will automatically appear in the sample
waveform for editing and will be selected in Project Information.
You can still use the Q-Link Knobs as you normally would in Trim Mode.
Hardware: To use Program Mode:
1. In Sample Edit Mode, press F2 (Program).
2. Press a pad to hear its sample(s). The sample on its first layer will automatically appear in the sample
waveform for editing and be selected in the Sample field.
• You can still use the Q-Link Knobs and Function Buttons as you normally would in Trim Mode.
To Next Page
Loading...
