Akai MPC User Manual

164
Effects
Insert Effects
Because you can view Program Channel strips in Track Mixer Mode, you can select
up to four insert effects for each Program, just as you could in Program Mixer Mode.
You can use various effects included in your MPC software as well as other VST and
AU plugins installed on your computer.
To learn how to use insert effects in the MPC software, please see Effects > Insert
Effects.
Tip: For a list of all available MPC software effects and their parameters, please see Appendix > Effects
and Parameters.
Send Effects
Because you can view Program Channel strips in Track Mixer Mode, you
can select up to four send effects for each Program, just as you could
in Program Mixer Mode. You can use various effects included in your
MPC software as well as other VST and AU plugins installed on your
computer.
To learn how to use send effects in the MPC software, please see
Effects > Send Effects.
Important: To use a send effect, you have to load an effect into the
corresponding send effect slot in Track Mixer Mode.
Tip: For a list of all available MPC software effects and their parameters,
please see Appendix > Effects and Parameters.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired