366
Return Channel Strips
The return channel strips operate similarly to other channel
strips: each has 4 insert slots, routing selector, a pan knob,
a mute button (M), a level slider, and a level meter.
Because each return channel now has 4 insert slots, you
are no longer limited to only 1 effect per send. Each
send is now routed through up to 4 insert effects on
each return.
To show or hide the return channel strips,
click the triangular arrow icon on the left side of
the channel strip area.
Master Channel Strips
The master channel strips operate similarly to other
channel strips: each has 4 insert slots, a pan knob, a
mute button (M), a level slider, and a level meter.
Normally, the channel strip for only the first master
output (Out 1,2) is shown (in the lower-right corner of
the window). Now, you can click and drag to expand the
area that shows the channel strips for the subsequent
master outputs.
To show or hide the master channel strips,
click the crown icon on the left side of the
channel strip area.
To Next Page
Loading...
Need help?
General
