346
Corrections for the MPC v1.7 User Guide
Keygroup Programs: User Guide 1.7 previously stated that Keygroup Programs have only one channel
strip. This has been corrected in Program Mixer Mode (Page 150).
Keygroup Programs actually have a channel strip for each individual Keygroup (up to 128).
Auto Scroll: User Guide v1.7 previously did not have a description of the Auto Scroll button. This has
been added to General Features > Mode Tab Section (Page 72).
Click the Auto Scroll button to switch between Follow, Page, and Off.
• When set to Follow, depending on the zoom setting, the grid will scroll
along in the background, keeping the position marker centered.
• When set to Page, the grid display will "turn over" to follow the position
marker.
• When set to Off, the grid will not move at all.
These functions also apply to the sample waveform in Sample Edit Mode.
Loading Audio CD Tracks from File Browser: User Guide v1.7 previously did not have a description of
loading tracks from an audio CD. This has been added to General Features > Browsers > File
Browser (Page 65).
To load a track from an audio CD into your Project, click and drag it from the File Browser onto the
software window.
Edit Sequence Window (Hardware): User Guide v1.7 did not have a description of the Edit Sequence
window (shown in the MPC hardware display only). This has been added to this addendum's Main
Mode > Sequence and Track Editing section.
To Next Page
Loading...
Need help?
General
