115
o Qlink Pan controls the sample's panning position in the stereo field.
o Level controls the sample's volume level.
o Env Attack controls the attack time of the Amp Envelope.
o Env Decay controls the decay time of the Amp Envelope.
o Env Release controls the release time of the Amp Envelope
o Send 1 to 4 controls the corresponding FX send levels for the selected pad.
If Midi is selected in the Instrument Section, The Q-Link
Knobs' Program Mode will look slightly different. To control a
desired parameter of an external sound generator by MIDI,
you can define a MIDI CC (MIDI Control Change). This can be
any MIDI Control Change from 1 to 128 for every Q-Link
Knob. Make sure that your external MIDI device is able and
set to recognize MIDI control change data.
To Next Page
Loading...
