119
Click the BPM field to set the desired tempo in beats per minute.
Hardware: Use the Cursor Buttons to select the Bpm field, and use the Data Dial or the -/+ buttons to
set the desired tempo in BPM (beats per minute).
Click the Swing field to change the groove of your Sequence. Values range from 50% to 75% and let
you "shuffle" your beats—from subtle to extreme.
Hardware: Press F1 (T.C) to locate the Swing parameter. It can be changed by using the Data Dial or
the -/+ buttons to set the desired value.
To Next Page
Loading...
