Akai MPC User Manual

206
Hardware: To manage the Sequence Playlist in Song Mode.
• Use the Cursor Buttons to select the Song field, and use the Data Dial or the -/+ buttons to select
the Song shown in the Sequence Playlist.
• Use the Cursor Buttons to select a Sequence in the Sequence column, and use the Data Dial or
the -/+ buttons to select which Sequence should be in that step.
• Use the Cursor Buttons to select the Rpts (Repeats) column, and use the Data Dial or the -/+
buttons to set how many times a Sequence will be played. Normally, a Sequence is played only
once, but you make it replay up to 999 times. If you set it to Hold (the lowest/"minimum" value), the
Sequence keep playing until you stop playback.
• Use the Cursor Buttons to select the Now field, and use the Data Dial or the -/+ buttons to
change the current position of the audio pointer in the Song. The arrow (>) in the Step column
indicates the current step in the Song.
Song Mode in the MPC hardware display.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired