Akai MPC

245
Reverb In Gate
This is a hall reverb with an additional control. The reverb effect is cut off when the input drops below the
level set in the Gate In parameter.
Parameter Value Range Default Value Q-Link Knob Number
Dry/Wet 0–100 (dry–wet) 50 Q13
Pre-Delay 1–100 50 Q9
Early Reflection 0–100 50 Q5
Density 0–100 50 Q1
Diffuse 0–100 50 Q14
Decay 0–100 75 Q10
Lo-Cut 0–100 10 Q6
Hi-Cut 0–100 10 Q2
Gate In 0–100 0 Q15