268
Compressor Opto
The Opto Compressor is modeled after a vintage compressor type using an optical circuit to control the
volume reduction of the input signal. These compressors are usually associated with soft and
unobtrusive attack and release characteristics.
Parameter Value Range Default Value Q-Link Knob Number
Dry/Wet 0–100 (dry–wet) 100 Q13
Input -6 – 18 dB 0 Q9
Attack 0–100 50 Q5
Release 0–100 50 Q1
Threshold -50 – 0 dB 0 Q14
Ratio 1–20 1 Q10
Knee 1–100 1 Q6
Output -6 – 24 dB 0 Q2
To Next Page
Loading...
