291
Clear: This will erase all pad events from the Sequence and reset all of its settings.
Hardware: To edit the current Sequence:
1. Use the Cursor Buttons to select the Seq field.
2. Press Window to open the Edit Current Sequence window.
3. Press F2 (Clear) to erase all pad events from the Sequence and reset all of its settings. Press F4 (Do
It) or F5 (Cancel) to confirm your choice.
(This function on your MPC hardware has existed in earlier releases but was not described in the earlier
User Guide.)
The Edit Current Sequence window in the MPC hardware display.
Export: This lets you export the Sequence as a standard MIDI file (.mid). In the window that appears,
enter a file name and set the save location. This option is useful when you want to import your
Sequences into separate sequencer software or exchange your Sequences with another artist. This is
the same as clicking the File menu, selecting Export, and selecting As MIDI File.
To Next Page
Loading...
