321
The Time Stretch process now has a Ratio setting, letting you easily calculate the time stretch factor.
To use the Ratio setting:
1. Click Time Stretch to open the Process Sample window.
2. Click and drag the Number Of Beats field up or down to
the desired value. Alternatively, double-click the field and
type in a number.
3. Click and drag the New field up or down to the desired
new tempo. Alternatively, double-click the field and type in
a number. The Ratio field will change automatically to
indicate the time stretch factor.
To adjust the ratio instead, click and drag the Ratio field up or down to the desired ratio.
Alternatively, double-click the field and type in a number. The New field will change automatically
based on the new time stretch factor.
Hardware: The Time Stretch process now has a Ratio setting, letting you easily calculate the time
stretch factor.
To use the Ratio setting:
1. In Trim Mode, press F6 (Process) to open the Process Sample window.
2. Use the Data Dial or –/+ buttons to set the Function field to Time Stretch.
3. Use the Cursor Buttons to select the New field and use the Data Dial or –/+ buttons to set the
desired value. Alternatively, use the numeric keypad to enter a value. The Ratio field will change
automatically to indicate the time stretch factor.
• To adjust the ratio instead, use the Cursor Buttons to select the Ratio field and use the Data Dial or
–/+ buttons to set the desired value. Alternatively, use the numeric keypad to enter a value. The
New field will change automatically based on the new time stretch factor.
4. Click F5 (Do It) or F4 (Cancel) to confirm or cancel the operation and exit the window.
Time Stretch in the Process Sample window in the MPC hardware display.
To Next Page
Loading...
Need help?
General
