Akai MPC User Manual

58
In the software, click the Program Edit tab. With the Sample drop-down menus for Layer 2 to Layer 4,
you can assign up to four samples (loaded into the Project Information beforehand) to create velocity
layers or make other layer-dependent adjustments.
Hardware: Press the Prog Edit button. Press F2 (Samples). With the Q9, Q5, and Q1 Q-Link Knobs,
you can load additional samples to your existing one. These samples are placed in up to four Layers.
To create complex Keygroup Programs, you can add more Keygroups (up to 128). This is useful when
working with multi-samples (e.g., when programming a real piano).
Remember: A Keygroup Program offers up to 128 Keygroups, and each Keygroup can hold up to four
samples (Layers 1 to 4). This is a total of 512 samples.

Akai MPC Specifications

General

Impedance	16 Ω
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	12 - 24000 Hz
Headphone sensitivity	114 dB
Cable length	2.1 m
Product color	Black, Red, Silver
Wearing style	Head-band
3.5 mm connector	Yes
Connectivity technology	Wired