80
In the upper-right corner of the
Grid View, there are some
menus and parameters you can
adjust:
• Click the Track drop-down menu to select one of the Tracks to view in the grid.
• Click and drag the Total Bars field up or down to change the selected Track's length. The default
setting is 2 bars. The maximum length is 999 bars.
• Click the Time Correct drop-down menu to select the note value to quantize to. Default is 1/16
(16th notes).
• Click and drag the Swing field up or down to set the amount of swing (from 50% to 75%) so you
can "shuffle" your beats—from subtle to extreme.
Hardware:
• Press the Main button and use the Cursor Buttons to select the Trk field. Use the Data Dial or the
-/+ buttons to select the desired Track. You can also use the F3 (Track-) or F4 (Track+) buttons.
• To change the number of bars, select the Bars parameter.
• To adjust the Time Correct and Swing, press the F1 button (T.C.) and use the Cursor Buttons to
select the Note field or Swing field. Use the Data Dial or the -/+ buttons to set the desired value.
Press F5 (Do It) to confirm the operation or press F4 (Close) to cancel it without making any
changes.
To Next Page
Loading...
Need help?
General
