Reference: Refer to “Flexible port role assignment” (p. 8-77).
Result: The Customer/Network Port Information (depending on the selected port
role) window is displayed.
...................................................................................................................................................................................................
5
Select the required PVID and the required Acceptable Frame Type.
Rules for PVID and VLAN configuration: For PVID and VLAN configuration follow
the following rules
1. Unused/unconnected port (i.e. not in a Spanning Tree Mode VS)
• default VLAN Id (/PVID) = 4093
• Acceptable Frame Type (default value as already specified)
Customer Port: Accept All Frames
Network Port: Only VLAN-Tagged
2. Customer Port in Virtual Switch Spanning Tree Mode with EtherType/TPID = 8100
(i.e. IEEE 802.1Q mode)
• default VLAN Id (/PVID) = 4093 allowed
• if default VLAN Id (/PVID) = 1.. 4093 then
a untagged VLAN Id = default VLAN Id is associated with that port
3. Network Port in Virtual Switch Spanning Tree Mode with EtherType/TPID = 8100
(i.e. IEEE 802.1Q mode)
• default VLAN Id (/PVID) = 4093
• no untag VLAN Ids associated with port (i.e. untagged port member set must
be empty)
• any number of tagged VLAN Ids associated with the port are allowed
4. Customer Port in Virtual Switch Spanning Tree Mode with EtherType/TPID 8100
(i.e. IEEE 802.1ad mode):
• default VLAN Id (/PVID) = 4093 allowed
• if default VLAN Id (/PVID) = 1.. 4093 then
there is one untagged VLAN Id = default VLAN Id associated with that port 3
(for the VLAN Id = PVID, the customer role port is always in the Untagged
Port Member set)
there are no other VLAN Id (tagged or untagged) associated with that port
5. Network Port in Virtual Switch Spanning Tree Mode with EtherType/TPID 8100
(i.e. IEEE 802.1ad mode):
• default VLAN Id (/PVID) = 4093
• no untagged VLAN Ids associated with port (i.e. untagged port member set
must be empty)
• any number of tagged VLAN Ids associated with the port are allowed
...................................................................................................................................................................................................
6
Select the Default User Priority applicable for incoming packets..
Traffic provisioning
Provisioning a virtual switch in spanning tree mode
....................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
8-109
To Next Page
Loading...
