Alcatel-Lucent 1643 AMS - Page 460

Reference: Refer to “Configuring LAN port parameters on a virtual switch”
(p. 8-108).
...................................................................................................................................................................................................
18
Provison WAN port parameters..
Reference: Refer to “Configuring WAN port parameters on a virtual switch”
(p. 8-110).
...................................................................................................................................................................................................
19
Fill in the Spanning Tree Path Cost and the Priority, select the required Flow Type.
Therfore proceed as follows:
1. Click
STP info {.button.
2. In the opened Spanning Tree Protocol Information screen click on Edit.
3. In the opened
Edit Spanning Tree Protocol Information screen you can select the
Bridge Priority, Spanning Tree Path Cost and the Priority.
4. Click on
OK to close the Edit Spanning Tree Protocol Information screen.
5. Click on Close to close the Edit Spanning Tree Protocol Information screen.
...................................................................................................................................................................................................
20
Click Close.
Result:
The Virtual Switch Information window is closed.
Configuring LAN port parameters on a virtual switch
...................................................................................................................................................................................................
1
Select Provisioning → LAN Management → Virtual Switch
Result:
The Virtual Switches List window is displayed.
...................................................................................................................................................................................................
2
Select the respective virtual switch and click Details.
Result: The Virtual Switch List Information window appears
...................................................................................................................................................................................................
3
Select the LAN/WAN port in the Port Membership field and click on Port Details.
Result: The Select Port Role screen is displayed.
...................................................................................................................................................................................................
4
Select the Port Role to be used for the LAN port.
Traffic provisioning Provisioning a virtual switch in spanning tree mode
....................................................................................................................................................................................................................................
8-108
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
E ND OF STEPS
...................................................................................................................................................................................................