Alcatel-Lucent 1643 AMS - Page 464

Additional info When QoS mode of a port is set to Default Profile, no rate
control is executed for the flows coming into this port.
Setting QoS mode to
Default Profile allows you to set-up your flow Pool
configuration (several steps needed) and then switch to this pool configuration with
changing the
QoS mode to Flow Configuration.
Related information For provisioning QoS refer to “Provision QoS Flow
Identification Table ” (p. 8-138).
...................................................................................................................................................................................................
12
Click on OK.
Result: The Customer/Network Port Information window is displayed.
Create a VLAN on a virtual switch
...................................................................................................................................................................................................
1
Select Provisioning → LAN Management → Virtual Switch.
Result:
The Virtual Switch List window appears and displays all virtual switches on
the selected physical switch.
...................................................................................................................................................................................................
2
Select a virtual switch from the list and click Details.
Result: The Virtual Switch Information window appears.
...................................................................................................................................................................................................
3
To create a new VLAN click Add in the VLAN field and continue with step 7.
Result: The Add Static VLAN Entry window appears.
...................................................................................................................................................................................................
4
To edit an existing VLAN select a VLAN from the list and click Details.
Result: The VLAN Information window appears.
...................................................................................................................................................................................................
5
Click Edit.
Result: The Edit Static VLAN Entry window appears.
...................................................................................................................................................................................................
6
Fill in the VLAN ID and the VLAN Label.
Traffic provisioning Provisioning a virtual switch in spanning tree mode
....................................................................................................................................................................................................................................
8-112
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
E ND OF STEPS
...................................................................................................................................................................................................