Provision QoS Flow Identification Table
...................................................................................................................................................................................................................................
When to use
To allow the user to edit the details of the LAN/WAN port QoS flow groups.
Note: The Provision QoS Flow Identification Table procedure is also applicable to
X5IP.
Related information
Refer to “Quality of Service provisioning” (p. 8-94).
Procedure
Complete the following steps to edit the Flow Identification Table:
...................................................................................................................................................................................................
1
Select Provisioning → LAN Management → Virtual Switch
Result:
The Virtual Switches List window is displayed.
...................................................................................................................................................................................................
2
Select the respective virtual switch and click Details.
Result: The Virtual Switch List Information window appears
...................................................................................................................................................................................................
3
Select a LAN/WAN port in the Port Membership field and click on Port Details.
Result: The Customer/Network Port Information window is displayed.
...................................................................................................................................................................................................
4
IF you want to THEN continue with
add a new Flow Table Step 5
insert a Flow Group Step 7
edit a Flow Group Step 11
delete a Flow Group Step 14
delete a Flow Table Step 16
...................................................................................................................................................................................................
5
Click on Add Flow Table.
Result: The Add Flow Table window is displayed.
...................................................................................................................................................................................................
6
In the Descriptor field enter none.
Traffic provisioning
...................................................................................................................................................................................................................................
8-138
Alcatel-Lucent - Proprietary
See notice on first page
365-312-807R7.2
Issue 4, May 2007
To Next Page
Loading...
