Alcatel-Lucent 5620 - Page 68

3 — Troubleshooting using network alarms
3-26 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
Table 3-10 Domain: circem
Alarm Attributes Additional information
Name: BatmPWVcCurrentFarEndFC
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the current
number of remote packet failures
crosses the threshold.
Name: BatmPWVcCurrentJtrBfrOverruns
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the current
number of out-of-range packets that
could not be re-ordered or fit in the
jitter buffer crosses the
threshold.The packet range is
indicated by the TDM header
sequence numbers.
Name: BatmPWVcCurrentJtrBfrUnderruns
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the current
number of jitter buffer underruns
crosses the threshold.
Name: BatmPWVcCurrentMalformedPkt
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the current
number of packets in the
Unexpected Size or Bad Headers
stack crosses the threshold.
Name: BatmPWVcCurrentNearEndFC
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the current
number of local packet failures
crosses the threshold.
Name: BatmPWVcCurrentPktsOoseq
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the current
number of successfully re-ordered
out-of-sequence packets crosses the
threshold.The packet sequence is
indicated by the TDM header
sequence numbers.
Name: BatmPWVcFarEndFC
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the total
number of remote packet failures
crosses the threshold.
Name: BatmPWVcJtrBfrOverruns
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the total
number of out-of-range packets that
could not be re-ordered or fit in the
jitter buffer crosses the threshold.
The packet range is indicated by the
TDM header sequence numbers.
Name: BatmPWVcJtrBfrUnderruns
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the total
number of jitter buffer underruns
crosses the threshold.
Name: BatmPWVcMalformedPkt
Type: thresholdCrossed (6)
Probable cause: thresholdCrossed (12)
Severity: Warning
Object Type (class): Interface
Domain: circem
Implicitly cleared (self-clearing): No
The alarm is raised when the total
number of packets in the
Unexpected Size or Bad Headers
stack crosses the threshold.
(1 of 2)
Aug 2010
AAAD
8.0 R4