IP Router Configuration Command Reference
118 Router Configuration Guide
none, be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11,
af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15, cp17, cp19,
cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44, cp45,
cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58, cp59, cp60, cp61, cp62, cp63
dot1p-priority — Specifies the Dot1p priority.
Values none, 0 to 7
dot1p-app-name — Specifies the Dot1p application name.
Values arp, isis, pppoe
dscp
Syntax dscp dscp-name fc fc-name
no dscp dscp-name
Context config>router>sgt-qos
Description This command configures DSCP name to FC mapping.
Parameters dscp-name — Specifies the DSCP name.
Values be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4,
cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32, af33,
af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23, cp25,
cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44,
cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58,
cp59, cp60, cp61, cp62, cp63
fc-name — Specifies the forward class name.
Values be, l2, af, l1, h2, ef, h1, nc
bfd-template
Syntax bfd-template name [create]
no bfd-template name
Context config>router>bfd
Description This command creates or edits a BFD template. A BFD template defines the set of configurable
parameters used by a BFD session. These include the transmit and receive timers used for BFD CC
packets, the transmit timer interval used when the session is providing a CV function, the multiplier
value, the echo-receive interval, and whether the BFD session terminates in the CPM network
processor.
Default no bfd-template
To Next Page
Loading...
