IP Router Configuration
Router Configuration Guide 119
Parameters name — Specifies a text string name for the template up to 32 characters in printable 7-bit ASCII,
enclosed in double quotes.
transmit-interval
Syntax transmit-interval transmit-interval
no transmit-interval
Context config>router>bfd>bfd-template
Description This command specifies the transmit timer used for BFD packets. If the template is used for a BFD
session on an MPLS-TP LSP, then this timer is used for CC packets.
Default no transmit-interval
Parameters transmit-interval — Specifies the transmit interval. The minimum interval that can be configured
is hardware dependent.
Values 10 ms to 100,000 ms in 1 ms intervals
Default 10 ms for CPM3 or higher; 1 second for other hardware
receive-interval
Syntax receive-interval receive-interval
no receive-interval
Context config>router>bfd>bfd-template
Description This command specifies the receive timer used for BFD packets. If the template is used for a BFD
session on an MPLS-TP LSP, then this timer is used for CC packets.
Default no receive-interval
Parameters receive-interval — Specifies the receive interval. The minimum interval that can be configured is
hardware dependent.
Values 10 ms to 100,000 ms in 1 ms intervals
Default 10 ms for CPM3 or higher; 1 second for other hardware
cv-tx
Syntax cv-tx transmit-interval
no cv-tx
Context config>router>bfd>bfd-template
Description This command specifies the transmit interval used by BFD packets used for MPLS-TP proactive CV.
To Next Page
Loading...
