Rockwell Automation Publication 1789-UM002K-EN-P - January 2015 175
Communicate with Devices on a DeviceNet Network Appendix A
The RSNetWorx for DeviceNet network appears.
At this point, you can configure your device’s network parameters so that
I/O data lengths and contents are in the desired formats. Devices default
to transmit and receive data format. Some device formats can be changed.
Changes should be made to such devices prior to creating the scanlist.
For more detailed information about configuring parameters for specific
devices, see the DeviceNet Network Configuration User Manual,
publication DNET-UM004
.
6. Make any changes to specific device parameters as needed.
7. From the File menu, choose Save, to save the network changes to
the project.
To Next Page
Loading...
Need help?
General
