Andreoli Engineering ATOM 1000 - Service Operations; Running-in Service; Scheduled Service

ANDREOLI ENGINEERING Operator’s Manual
Self-propelled sprayer ATOM
159/166
8 SERVICE OPERATIONS
8.1 RUNNING-IN SERVICE
During first 8 – 16 hours
Check all nuts and fittings tightening torque.
Check wheel fixing nuts tightening torque.
Check chemicals pump oil level.
After first 50 hours
Change engine oil.
Change engine oil filter.
Check belt tension for A/C compressor and alternator drive.
Check belt tension for chemicals pump drive.
Check coolant level.
After first 100 hours
Replace hydrostatic main suction/return oil filter cartridge.
8.2 SCHEDULED SERVICE
FREQUENCY
COMPONENT
ACTION
When necessary
or
Every year
Cab air filter
Check / Clean
Engine air filter
Check / Clean
Replace
Cooler
Clean
Machine
Clean
Emergency braking system
Bleeding of the circuit by an Authorized
Service
Hydraulic circuit hoses
Check / Inspection
Chemicals pump diaphragms
Check / Replace
Chemicals pump oil
Replace
Every 10 hours
or
Every day
Engine oil
Check level
Engine coolant
Check level
Chemicals circuit suction filter
Clean
Chemicals circuit pressure filter
Clean
Cooler
Clean
Blower and fan
Check / Clean
Chemicals pump oil
Check level
Every 25 hours
Cab suspension air bags
Check inflating pressure - height
Tires
Check inflating pressure
Hydrostatic oil tank
Check oil level
ENGINE: see engine manual.
CHEMICALS PUMP: see chemicals pump manual
AXLES: see chapter in this manual