Anritsu MS9710C User Manual

Section 11 LabVIEW Measuring Instrument
11-12
MS9710A Light Output Off/On
MS9710
Int.Light
This driver turns on/off the internal light source (white light source, reference light source: option).
Input parameter:
Off/On (Off:F) ............................ Turn on/off optical output.
MS9710A Peak to Center
MS9710
Center
This driver sets the peak wavelength to the center wavelength.
MS9710A Peak to REF Level
MS9710
Ref Lvl
This driver sets the peak level to the reference level.
MS9710A Printer Copy/Feed
MS9710
Copy
Feed
This driver produce a hard copy of or feeds the internal printer screen.
When a hard copy is produced, the VI is terminated after completion of data transfer to the printer.
Input parameter:
Number of Line Feed (Copy: 0)... When no value is input, a hard copy is produced.
When 1 or greater value is input, the internal printer feeds lines equivalent to the
input value.

Anritsu MS9710C Specifications

General

Brand	Anritsu
Model	MS9710C
Category	Measuring Instruments
Language	English