Section 11 LabVIEW Measuring Instrument
11-26
MS9710A Measure Mode ;TLS Tracking
MS9710
TLS
Tracking
This sets the TLS tracking measurement mode to ON or OFF.
Input parameter:
YLS Tracking On/Off (0: Off) ... Sets the TLS tracking measurement mode to ON or OFF.
0. OFF
1. ON
MS9710A Measure Mode: Adjust to TLS
MS9710
Adjust
to TLS
This performs Adjust to TLS of the TLS tracking mode.
Input parameter:
Adjust to TLS (0: Cancel) .......... Performs Adjust to TLS of the TLS tracking mode
0. Cancel
1. Execute
MS9710A MeasurMode ;Ext.Trigger
MS9710
Ext.Trig
This driver carries out EXT trigger measurement.
When carrying out EXT trigger measurement, execute “Measure Mode Off.vi”.
Input parameter:
Delay Time (ms) (no change) ..... Delay Time (ms) (no change): Set a delay time (0 to 5000000 us).
When no value is input, the previous setting is used.
MS9710A MeasurMode ;Measure Mode Off
This driver passes through EXT trigger and power monitor measurement modes and return to the normal measure-
ment mode.
MS9710A MeasurMode ;Peak Hold
MS9710
PkHold
(Not used by MS9710C.)
To Next Page
Loading...
