6-19
6.6 Operation
[5] Data Input (Data input section)
This section is used to modify the specification data displayed in section [4]. Input a
numeric data directly into the box.
[6] OK (O) (“OK” button) This button is used to confirm the modified data. The input data is confirmed, and the
screen returns to the “Initial Menu Screen” shown in Fig. 6-4.
[7] Cancel (C) (“Cancel” button) This button is used only to view setup values for confirmation. When this button is
used, the modified information will be returned to the pre-modification information
(stored in the initial file).
To Next Page
Loading...
