AT&T PC 6300 - Page 103

n
n
INSTALLATIONS
n
n
n
i 1
n
n
I !
n
n
9. Align the RAM chip pins (A) with a socket (B) as in
Figure 3-5. Make sure that the notch in the chip (C) is
facing the same direction as the other chips on the board. To
insert, push the chip down firmly.
Figure 3-5. Inserting RAM Chip into the Socket
10. Repeat Step 8 for the remaining 17 sockets in Bank 1 of the
Motherboard memory.
11. Remove the wrist strap (if a wrist strap was used).
3-15
n
n
n