AT&T PC 6300 - Connecting the Mouse to the Computer

INSTALLATIONS
Connecting the Mouse to the Computer
1. Turn off the power (if the power is not off already).
2. Locate the Keyboard Mouse Connector (mouse port) on the
back edge of the Keyboard (Figure 3-54).
3. Press the plug at the end of the mouse cable into the mouse
port.
4. Tighten the screws on the sides of the mouse plug.
3-102
0
0
n
0
0
n
n
n
0
n
n
n
n
0
n
n
n