AT&T PC 6300 - Partition Hard Disk for MS-DOS

MAINTENANCE
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n '
30. Type 1234 and press Return. The message, "DO YOU WANT
TO EDIT THE BAD TRACK TABLE?" is displayed. Type n
n and press Return.
31. Select the option RETURN TO THE MAIN MENU by
n typing 0, followed by pressing Return. The message "DO YOU
' ' WISH TO DISPLAY BAD TRACK TABLE?" is displayed.
Type n and press Return.
32. From the TESTING OPTION MENU, type 4 EXIT
DIAGNOSTIC PROGRAM.
33. Remove System Test diskette from drive A. Insert the
MS-DOS System Diskette and reboot the system.
Partition Hard Disk for MS-DOS
1. Insert the MS-DOS System Diskette into drive A.
2. Enter the fdisk command.
3. The fdisk options are then displayed- Select option 1
(default) by pressing the ENTER key.
5-45