AT&T PC 6300 - Installing the Mouse; Installing the Ball in the Mouse

INSTALLATIONS Pj
^ 1
n
Installing the Mouse
Installing the Ball in the Mouse
1. Turn the mouse upside down to locate the ball housing
cover. Remove the cover by turning it counterclockwise
(Figure 3-53).
2. Insert the ball into its housing.
3. Replace the cover and secure it by turning it clockwise.
Note: The ball is designed to roll easily within its
housing.
3-100
n
f !
n
n
0
n
0
n
n
n
n
n
n
n
n