AT&T PC 6300 - Installing the Keyboard ROM; Opening the Keyboard

INSTALLATIONS
Installing the Keyboard ROM
Opening the Keyboard
1. Turn off the power.
2. Turn the Keyboard upside down.
3. Release the latch nearest the Keyboard cable with a small
screwdriver while spreading apart the top and bottom halves
of the Keyboard. Proceed clockwise until all the latches
have been released (Figure 3-55).
Figure 3-56. Unlocking Latches on the Keyboard
4. Remove the half of the Keyboard housing that is facing up.
n
n
n
n
0
n
n
n
n
0
n
n
3-104
n
0
n
D