AT&T PC 6300 - DIPSW-1 Settings

n
n
n
n
n
n
APPENDIX A: SWITCHES AND JUMPERS
n
n
n
n
n
n
n
n
n
n
n
DIPSW-1 Settings
The switches SWl - SW8 are used to reflect options associated
with the MFD Units, HDU, and Display. Figures A-7 and A-8
show the various switch settings for DIPSW-1.
• SWl — Floppy Type
• SW2 — Fast or Slow Startup (Floppy Speed)
• SW3 — HDU Indigenous or External
• SW4 — Not used with (ROM 1.21 or below) or
n Scroll Speed (ROM 1.43)
• SW5 — Display Type
A jCuTA T^iar\lo«r
• SW6 — Display Type
• SW? — Number of Floppies
• SW8 — Number of Floppies
.A.-13