AT&T PC 6300 - Manual Mode

u
n
<T
i (,
n
)
fl
U
DIAGNOSTICS
Manual Mode
If you pressed the n key followed by the ENTER key, the
Customer Test is placed into the Manual Mode and MENU A is
displayed.
MENU A
The purpose of MENU A is to provide you access to the various
Testing Options.
TESTING OPTIONS
0 - EXECUTE TESTS ONCE
1 - FORMAT SCRATCH DISKETTE
2 - EXIT DIAGNOSTICS PROGRAM
ENTER DESIRED ACTION -
n
Pressing the 0 key followed by the ENTER key takes you to
MENU B where the list of installed hardware is displayed. You
must verify that the list of installed hardware is correct. If you
indicate that the list is correct, you are taken to MENU C where
either all tests or specific tests are run once.
Pressing the 1 key followed by the ENTER key takes you to
MENU D which is the format scratch diskette menu.
ri
4-25
11