AT&T PC 6300 - Floppy Disk Systems

n
n
n
n
n
n
n
INSTALLATIONS
n
n
n
n
n
n
Floppy Disk Systems
The following procedures apply for systems with either one or two
floppy disk drives.
1. Copy the system diskette (MS-DOS) using the "diskcopy"
command as follows:
a. Insert the system diskette MS-DOS (that came with the
system) in drive A and boot up.
b. Insert a blank diskette in drive B. If the system has
only a single drive, MS-DOS treats it as both drive A
and drive B.
Note: The "diskcopy" command will
automatically format the target (blank) diskette.
3-91