AT&T PC 6300 - Page 112

INSTALLATIONS
9. Replace the lower System Module cover and tighten the two
screws that secure the cover.
10. Place the System Module back to its upright position.
11. Slide the upper cover forward approximately 0.5 inch and
lift it from the System Module.
12. Using a screwdriver, remove the Expansion Slot Cover of
the second dual connector expansion slot (Figure 3-12).
^ ■
. A
A III
1 ^
D
n
n
0
n
n
n
1 i
n
U
.0
n
Figure 3-12. Removing the Expansion Slot Cover
3-24
n
n
Pi
n
n
n