AT&T PC 6300 - Page 133

I«<j
INSTALLATIONS
n
! 1
n
n
n
9. Remove the three remaining screws that hold the metal
cover of the lower MFD Unit in place and lift the cover and
the upper MFD Unit from the assembly.
10. Remove the four screws that attach the upper MFD Unit to
the cover and remove the MFD Unit from the cover
(Figure 3-25).
Figure 3-25. Removal of Upper Mini-Floppy Disk
Unit From Cover
n
n
n
n
n
n
3-45