AT&T PC 6300 - Page 300

DIAGNOSTICS
7. The program can operate with two Hard Disk Units.
8. The program protects the user from unintended destructive
operations as follows:
a. A verification input is required from the user before
starting any destructive operation of data stored on the
HDU.
d. A quit selection doesn't cause the utility to be exited.
e. Only one HDU at a time can be selected for operations.
The HDU drive selected for operations is displayed.
9. The program is able to Low-Level Format a HDU that has
previously been low-level formatted.
11. The default number of retries is set at 2 in the Verify Surface
Test. If after two retries a sector cannot be read without
error, the sector is considered bad.
4-94
-n.
0
0
0
n
b. There are no default limitations for the destructive
operations or for selecting the HDU. The user selects the 7]
drive and the operations during the start session. I i
X
c. A quit prompt appears before starting a data destructive M
operation.
11
n
. n
10. The Verify Surface Test has a multiple loop option capability. ^
The test will inquire as to the number of test passes to run. ) 1
n
.n
' j ,
r?
n
0
n