AT&T PC 6300 - Page 323

n
DIAGNOSTICS
n
n
n
n
n
3 - DELETE BAD TRACK(S) FROM TABLE: This option
^ allows the user to manually delete tracks from the bad track table.
\ j Its main function is to delete tracks that were previously added by
mistake. If the BTT is empty, the following message is displayed:
- NO BAD TRACKtSJ PRESENT ON TABLE
- PRESS ENTER KEY TO CONTINUE -
and the program returns to Main Menu.
S
If the bad track is not found, the cylinder # and head # of the track
to be removed are limit checked. If they are not within limits, the
following message is displayed:
WARNING: THE ENTERED BAD TRACK IS ALREADY ON THE BAD TRACK TABLE
n The following information is used with the "Delete Bad Track(s)
From Table" option:
a. To return to the editor menu, enter a carriage return in
i I response to either the cylinder # or head # prompt.
b. The keys PG UP and PG DN scroll the BTT screen.
J 1
c. The ESC key is used to exit from the add bad track option,
^ and the DEL key deletes the selected bad track.
n
n
n
n
n
4-117