AT&T PC 6300 - Page 427

n
n
n
n
n
n
n
n
n
n
MAINTENANCE
n
n
n
n
n
3. Remove the MS-DOS System Diskette from drive A.
At this point, you should be able to boot MS-DOS from the HDU.
If the system will not boot from the HDU, enter the command
dir c; in an attempt to read the contents of the HDU. If this is
successful, reformat the HDU (format c; /s) and try booting the
Operating System again. If this is unsuccessful (cannot read
drive C), replace the HDU.
5-49