AT&T PC 6300 - Page 452

MAINTENANCE
7. IS THERE A MOUSE CONNECTED? is displayed. Press
the n key if your system does not have a mouse. If your
system does have a mouse, press the y key.
8. The list of installed hardware is displayed along with IS
LIST OF HARDWARE CORRECT? Press the y key
followed by the ENTER key (3.18 or later versions of
Diagnostics).
9. Verified list of hardware is displayed along with
information on performing all tests or individual tests.
Select the Video Test by pressing the 5 key followed by the
ENTER key.
5-74
0
0
n
0
n
10. PAUSE ON ERROR? is displayed. Press the y key followed
by the ENTER key. -
11. The VIDEO TEST SELECTIONS is displayed along with nT^
ENTER SELECTION(S). Select 20 (Perform all tests) —
followed by the ENTER key. ^
n
0
Q
n
n
n
1 I
-S.M
0