AT&T PC 6300 - Page 478

MAINTENANCE
Verified list of hardware is displayed along with
information on performing all tests or individual tests.
Select the XX MB HDU Test by pressing the 9 key followed
by the ENTER key.
the desired action.
12. HDU tests 1 through 7 will run and the name of the test
being run is displayed. An error message similar to the
following is displayed if an error occurs:
>
00:00:00 PASS #1
901 - 10 MB HARD DISK DRIVE
TIME GUT
0 0 0 1
Z0080
DRIVE
TRACK HEAD SECTOR CODE
5-100
n
n
7. IS THERE A MOUSE CONNECTED? is displayed. Press
the n key if your system does not have a mouse. If your
system does have a mouse, press the y key (3.18 or later M
versions of Diagnostics).
8. The list of installed hardware is displayed along with "IS I
LIST OF HARDWARE CORRECT?" Press the y key --
followed by the ENTER key.
n
n
10. PAUSE ON ERROR? is displayed. Press the y key followed i
by the ENTER key.
11. Number of retries on HDU error (0 to 5) is displayed. Enter ,
n
n
n
n
n
n
n
n