AT&T PC 6300 - Page 502

MAINTENANCE
2. Turn the power switch OFF.
3. Insert the MS-DOS System Diskette into drive A.
5. Remove the MS-DOS System Diskette from drive A.
6. Insert the System Test Diskette into drive A (3.18 or later
versions of Diagnostics).
7. Enter:
A> systeo<CR>
L_.. J
■0
0
n
4. Turn the power switch ON and verify that the Operating A
System is booted. '
0
n
0
II
and wait for TESTING OPTIONS to be displayed, along |S
with ENTER DESIRED ACTION. Press the 0 key followed ^
by the ENTER key.
f1
5-124
y
il