AT&T PC 6300 - Page 67

n
n
V
n
n
n
■J
n
17'
n
-H
n
a
•n
V Y
SYSTEM OVERVIEW
The Memory Expansion board is inserted in a 16-bit expansion slot
on the Bus Converter Board. The minimum amount of memory on
the Memory Expansion Board is 256 KB (128 KB in bank 0 and
128 KB in bank 1). This can be expanded up to 384 KB by
inserting chips into bank 2. The Motherboard must have
256-KB RAM before the Memory Expansion Board can be used-
Note: If the Display Enhancement Board (DEB) is to be
installed, the recommended installation location is the first
16-bit expansion slot with the Memory Board in the second
16-bit expansion slot.
2-43