Digital Video Recorder
13
To export the current DVR settings, connect the USB device to the DVR. Highlight Setup – Export…
and press the
button.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related
settings (Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight Show System Log… and press the
button to display the System Log.
Figure 11 ─ System Log screen.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data… and pressing the
button will clear all video data. You will be asked to
verify that you wish to clear all data before the DVR erases the video data. Clear All Data… will not
clear the System Log.
After you are finished with the Information Screen, you can highlight Save and press the
button to
save the changes and exit the screen. If you do not wish to save the changes, highlight Cancel and press
the
button to exit the screen.
Figure 9 ─ Setup Import screen.
Select the desired setup file and press the Import button
to import the selected settings and change the DVR
settings accordingly. Highlight Include Network
Setup and press the
button to toggle between On
and Off. When set to Off, the network settings will not
be changed.
Figure 10 ─ Setup Export screen.
Highlight the box beside File name and press the
button. A virtual keyboard allows you to enter the file
name. Selecting Export will save the current settings
in .dat file format on the USB device.
The System Log screen lists system activities (up to
5,000 from the latest) that have occurred along with
the time and date. The
icon will be displayed in the
last column for system activities of the remote site.
You can scroll through the log pages by using the Up
and Down arrows, or you can go directly to a log page
by entering the log page number in the box at the
bottom left of the screen. Highlight Close and press
the
button to exit the screen.
To Next Page
Loading...