User’s Manual
64
NOTE: The lower number of the Segment indicates the latest recorded video.
Once you have set the date and time you want to search, highlight GO and press the
button. The
selected date and time will display. The
button and arrow buttons can now be used to review the
surrounding video.
NOTE: It is possible that no recorded image displays on the current screen. Press the DISPLAY
button and change the screen mode to 4x4. You will be able to easily see the camera have
recorded video during target time.
Event Log Search
Figure 89 ─ Event Log Search screen.
The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen
displays this list. Use the arrow buttons to highlight the event for which you would like to see video.
The Event Log Search screen can also be accessed by pressing the
ALARM button unless there is an alarm.
There is no determined user authority to display the Event Log Search screen, however, the event video
will not be played unless a user with Search authority logs into the system.
Pressing the
(Play/Pause) button will extract the event video and display the first image of the event.
Pressing the button will start playing the “event” video segment. Pressing PLAYBACK button returns
to live monitoring.
NOTE: It is possible that no recorded image displays on the current screen. Press the DISPLAY
button and change the screen mode to 4x4. You will be able to easily see the camera have
recorded video during target time.
You can also narrow your event search by selecting the Option… button and setting up the new search
condition.
To Next Page
Loading...