User’s Manual
46
Figure 68 ─ Video Loss Actions 2 screen.
Highlight the desired box under the PTZ heading, and press the button. A list of PTZ presets appear.
Select the preset position for each PTZ camera, where you want PTZ cameras to move to when the DVR
detects video loss on the selected camera’s input.
Highlight the box under the Spot Monitor heading and press the
button. A list of a SPOT monitor and
cameras appears. A SPOT monitor can be associated with a camera. The DVR will display the
associated camera on the SPOT monitor whenever it detects video loss on the selected camera.
You can save your Video Loss changes by highlighting Save and pressing the
button. Selecting
Cancel exits the screen without saving the changes.
Text-In Screen
Highlight Text-In in the Event menu and press the button. The Text-In setup screen appears.
Figure 69 ─ Text-In Settings screen.
The DVR can be set to react to text input from devices such as ATMs (Automated Teller Machines) and
POS (Point of Sale; i.e., cash registers). This screen allows you to configure the DVR for each text-in
device.
To Next Page
Loading...