ATV Falcon - Appendix D: Troubleshooting Guide; Common DVR Problems and Solutions

Digital Video Recorder
67
Figure 92 ─ Text-In Search Option screen.
You can search video from the first to last recorded images, or you can set the start and stop times and
dates.
Highlight the box beside From and press the
button to toggle between On and Off. When set to Off,
you can enter a specific Date and Time. When set to On, the search will be from the first recorded image.
Highlight the box beside To and press the
button to toggle between On and Off. When set to Off, you
can enter a specific Date and Time. When set to On, the search will be from the last recorded image.
Highlight the Channel and press the
button. Select the text-in devices that you want to search for text
input.
Highlight the text input device box and press the
button. Select your Text Input Device from the list.
Highlighting the
+
and pressing the
button allows you to add a new set of search parameter. Set up the
desired search parameter. Refer to the Appendix B – Text-In Search Examples for further information on
setting up search parameters. The
column can be used to delete a set of search parameter or entire sets
of search parameters.
Highlight Case Sensitive and press the
button. This will toggle between On and Off. When this
feature is On, the search will find only those text strings in which the case matches.
Highlight Load and press the
button to load saved search option settings. Select the desired search
option settings.
Highlight Save and press the
button to save the current search option settings. A virtual keyboard
appears that you can use to enter the search option name.
Once you set your desired search conditions, highlight Search and press the
button to display the
search results in the Text-In Search screen. Selecting Cancel exits the screen without saving the
changes.