Version 5.8 141 September 2009
SIP User's Manual 3. Web-Based Management
¾ To configure the reasons for alternative routing:
1. Open the 'Reasons for Alternative Routing' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Reasons for Alternative
Routing page item).
Figure 3-81: Reasons for Alternative Routing Page
2. In the 'IP to Tel Reasons' group, select up to four different call failure reasons that
invoke an alternative IP-to-Tel routing.
3. In the 'Tel to IP Reasons' group, select up to four different call failure reasons that
invoke an alternative Tel-to-IP routing.
4. Click the Submit button to save your changes.
5. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
To Next Page
Loading...
